Embedded Grit GRP Molded Grating with Square Mesh

Product Description

Concave Surface FRP Fiberglass Grating

Brief Introduction of FRP grating

Fiberglass Reinforced Plastic (FRP) is a plank shaped material cured in the matrix of unsaturated resins including isophthalic, orthophthalic, vinyl ester and phenolic, with reinforced frame of fiberglass roving through a special production process, with a certain rate of open meshes.


Properties of Powergrate FRP Molded Gratings:

1. Corrosion and chemical resistance
Corrosion is a major problem for metal or wooden grating, stair treads and other products in many different industries such as chemical plants, food and beverage factories, water and wastewater facilities, power facilities. PowerGrate is particularly designed to provide safe, long-lasting, economical and worry-free solutions in environments where chemicals and other corrosive materials attack and destroy metal or wood. According to different environmental requirements, such resins as orthophthalic polyester, isophthalic polyester, vinyl ester or phenolic are chosen as matrix material.

2. High strength-to-weight ratio
Josson manufactured as a composite of continuous fiberglass strands and h
quality resin is integrally constructed for strength, but it is less than one-half the weight of steel grating allowing easy removal for access below floor level and installation with no heavy equipment and less manpower. Properly installed, Josson gratings meet specified load requirements for steel and are more impact resistant than metal.

3. Impact resistance
The impact resistance of Josson grating allows repeated deflection without permanent d
memory, so once the object is removed, the fiberglass grating will fully recover to its original position.

4. Fire retardant
Fiberglass grating has flame spread rating of 25 or less depending on different resin systems as tested in term of ASTM E-84. Test Report can be offered upon request. Special fire retardant requirements can also be met by adding extra additives.

5. Ergonomic
Employees are experiencing fatigue after standing on solid concrete or heavy non-adjustable galvanized steel platforms all day, fiberglass grating are the best solutions to ease the strain on the backs, feet and legs of workers increasing workers' comfort and productivity due to its natural slight resiliency that makes them comfortable to stand on for a long period.

6. Slip-resistant
PowerGrate grating has a concave top surface for slip resistance after it is extracted from the mold. Should a grit surface be specified, the grit would be either bonded to the top of the completed grating as a secondary operation or embedded to the top of grating before heating, both providing superior slip resistance. Diamond cover top or gritted cover top are also available upon request.

7. Life span
More than 20 years of Life is guaranteed for PowerGrate gratings.

8. Low maintenance
Install it and forget about it. PowerGrate is easy to clean, its open meshes permitting debris to fall through grating panel and preventing hazardous buildup on walking surface.

9. Safety
NON-CONDUCTIVE property makes PowerGrate grating ideally suitable in electrically hazardous locations acting as an insulator.
NON-MAGNETIC property allows PowerGrate grating to be used in sensitive installations where the inherent magnetic properties of metal grating will prove dangerous.

10. Comprehensive economic efficiency
The cost of PowerGrate grating is about 1.4-1.8 times that of steel grating, installation cost is about 20-40% that of steel grating, and maintenance cost is about zero. But steel gratings must be maintained every year, and the accumulated cost will be a very high sum. Therefore, the cost of PowerGrate grating is a little higher than that of steel grating, but the comprehensive economic efficiency, plus other advantages, is much higher than that of steel grating.
 

Resin Type: 

Resin Type	Resin Base	Description	Corrosion Resistance	Flame Spread Rating ASTM E84	Max. Oper. Temp
Type VEFR-25	Vinyl Ester	Superior Corrosion Resistance and Fire Retardant	Excellent	Class 1, 25 or less	230°F (110°C)
Type VEFR-10	Vinyl Ester	Superior Corrosion Resistance and Enhanced Fire Retardant	Excellent	Class 1, 10 or less	230°F (110°C)
Type IFR-25	Isophthalic Polyester	Industrial Grade Corrosion Resistance and Fire Retardant	Very Good	Class 1, 25 or less	221°F (105°C)
Type FG-30	Isophthalic Polyester	Food Grade Corrosion Resistance and Fire Retardant	Very Good	Class 1, 30 or less	221°F (105°C)
Type CFR-25	Ortho	Moderate Corrosion Resistance and Fire Retardant	Moderate	Class 1, 25 or less	212°F (100°C)
Type MP-5	Phenolic resin	Low Smoke and Superior Fire Resistance	Very Good	Class 1, 5 or less	356°F (180°C)
Type IFR-10	Isophthalic Polyester	Industrial Grade Corrosion Resistance and Extra Fire Retardant	Very Good	Class 1, 10 or less	221°F (105°C)
Type O-AN	Ortho	Moderate Corrosion Resistance	Moderate	No	212°F (100°C)

 

Fiberglass Type: 

Code Name	Type	occasion applicable
E	E-glass	High strength and high corrosion required

 



Installations of Powergrate FRP Molded Gratings: 




Surfaces of Powergrate FRP Molded Gratings:
·Meniscus(Concave)
·Smooth
·Embedded Grit
·Post-cure Grit
·Mini mesh
·Micro mesh
·Mirror surface
·Chequered plate
·Gritted solid top



Applications of Powergrate FRP Molded Gratings:
·Trench cover
·Double deck floor
·Plank road
·Operation platform
·Platform around tank
·Offshore oil platforms
·Sewage treatment
·Boats and others



 

Our Services:

Nantong Josson New Material Technology Co.,Ltd. is one of the world's leading manufacturers of molded and pultruded fiberglass (FRP/GRP) grating products.

We offer a complete line of Powergrid brand products such as grating, covered grating, conductive grating, stair treads, stair tread covers, plates, and other accessories.

Our high-quality fiberglass grating products are designed and manufactured to provide long lasting performance for industrial and offshore applications.

Since our inception, Powergrid has been dedicated to the ideal of making best value Fiberglass grating products in the world through the combination of wide selections, high quality and competitive prices.

Contact us to find out the secret to our success and what makes us the preferred partner of many world's leading companies in composite and grating industries.

Advantages:

1. More than 100 pcs molded grating molds & 25 pcs pultrusion lines.

2. 53,000 square meters factory and 200 employees.

3. DNV,ISO certified. ABS,Intertek tested.

4. Annual sales revenue:12,000,000 USD

Any pending order, pls kindly send us your specifications for quotation. We will try our best to give you great service.



Please do not hesitate to contact with us iif you have any questions, we will try our best to serve you well. It's our great pleasure to invite you all to visit our company and we are looking forward to developing business with you all over the world.